Your WiFi network has a security type, which is the thing that decides how well your password, messages, and banking details are protected when traveling through the air. Many people set up a router once, connect everything, and never look at this setting again.
This guide shows you exactly how to find the security type of the network you are connected to, step by step, on Windows, macOS, Android and iPhone. It also shows you how to confirm the setting inside your router, what each type actually means, and what to do if yours turns out to be one of the old, weak ones.
What a WiFi security type actually is
The security type is a protocol used by your router to check whether a device is authorized to join the network and scramble data that passes between a device and a router. The scramble is called encryption. Anyone with the right tools can capture the WiFi signals within range, so encryption ensures that the captured traffic is not readable.
You probably saw the main names before. WEP is the oldest and weakest. WPA replaced it, then WPA2, and the current standard is WPA3. There is also the open option, which uses no password or encryption.
If your network still has WEP or the original WPA, your connection can be cracked with free software and a little patience. WPA2 with AES encryption is still considered safe for use at home and WPA3 is stronger. The steps below will tell you which one you actually have, not the one you hope you have.
How to check on Windows 10 and Windows 11
Windows shows you the security type of your current connection in the settings. You do not need any extra software.
1. Press the WiFi icon in the taskbar at the bottom right corner of the screen.
2. Click the small arrow next to the WiFi button to open the list of networks, then click the info or properties icon next to the Connected network. In Settings, you can find the same screen under Network and Internet, then WiFi, then your network name.
3. Scroll down to the Properties section of the page.
4. Look for the line labelled Security type. It’ll be something like WPA2-Personal, WPA3-Personal, WPA2-Enterprise, WEP or Open.
There is also a fast text route. Open Command Prompt, type netsh wlan show interfaces, then press Enter. The Authentication line shows the protocol your connection is using, and the Cipher line shows the encryption associated with it, for example CCMP, which is AES. Both routes show the mode your PC negotiated with the router.
How to check on a Mac
macOS hides this detail one click deeper, but it’s still quick once you know the trick.
1. Hold the Option key on your keyboard.
2. Click on the WiFi icon in the menu bar at the top of the screen while holding it.
3. A menu appears longer than usual with technical details about your current connection.
4. Look for the Security line. It shows the protocol that is used such as WPA2 Personal, WPA3 Personal or WPA2/WPA3 Personal.
You can also open System Settings and go to WiFi to review the connection, but the Option click menu is the most direct place where the Security value is printed.
How to check on Android
Android prints the security type in the network details, although the menu names shift a little between phone manufacturers.
1. Open Settings and tap Network and internet. On Samsung phones this section is called Connections.
2. Tap WiFi.
3. Tap on the network name which shows Connected. On some phones, instead, you tap the gear icon next to it.
4. Look for the Security field in the details that open.
This is usually shown as WPA2-PSK, WPA3-SAE or WPA/WPA2-PSK. PSK simply means a shared password is used, which is the usual setup at home, while SAE is the sign-in method used by WPA3.
How to check on iPhone and iPad
iPhone has a different approach. iOS doesn’t print the name of the protocol on the network page, so you read the answer from what it doesn’t say.
1. Open Settings and tap Wi-Fi.
2. Find your connected network at the top of the list and tap the blue info icon, the little i in the circle, next to its name.
3. Look at the main Wi-Fi page and check if the words Weak Security appear below your network name.
If you see that warning, the network uses WEP, the original WPA or WPA2 with the old TKIP cipher, and iOS tells you it doesn’t trust it anymore. If there’s no warning, your network is almost definitely running WPA2 with AES or WPA3, both of which Apple considers acceptable. For a definite answer, use the router check below.
How to check inside your router
The router is the source of truth, as the security type is a router setting in the first place. Your devices only report what the router has offered them. Checking there also puts you in the right place to repair the setting if it is weak.
1. Connect a phone or computer to the network and open a browser.
2. Enter the router address into the address bar. Common options are 192.168.0.1 and 192.168.1.1. The exact address and default login are printed on the sticker on the router itself, and many newer routers use a companion app instead.
3. Log in with your admin username and password. If these are still factory defaults from the sticker, change them while you’re here.
4. Open the Wireless or WiFi settings section.
5. Look for a field labeled Security mode, Security type or Authentication. This is the setting for your network, shown plainly.
If your router broadcasts separate 2.4 GHz and 5 GHz networks, check both bands, because each one has its own security setting. Apple makes the same point in its own guidance, recommending that owners set their router to WPA3 Personal, or WPA2/WPA3 Transitional for older devices, and apply the choice consistently to every band the router offers.
What each security type means
Once you have the name, here is what it says about your safety.
WEP has been around since the late 1990s and was the first attempt at WiFi encryption. Its design flaws have been exposed for a long time, and the keys protecting a WEP network can be recovered within minutes by anyone who can capture enough traffic. If you see WEP, treat the network as open.
WPA came in 2003 as an emergency patch for WEP and relies on TKIP encryption. It was better than WEP, but it is also considered broken today. Plain WPA, and mixed WPA/WPA2 modes, belong to the past.
WPA2 is a 2004 standard and brought AES encryption, which is much stronger. WPA2 Personal with AES is still a reasonable choice for a home network, particularly if some devices are too old for anything new. Its known weakness is that a captured handshake can be attacked offline by guessing passwords, so a long, unique WiFi password is important.
Since it was released by WiFi Alliance in 2018, WPA3 is the current standard. It uses a sign in method called SAE that blocks those offline password guessing attacks, and it protects traffic even if the password is discovered later. Routers often offer a WPA2/WPA3 transitional mode, which allows new devices to use WPA3 while older devices fall back to WPA2.
Open means no password and no encryption. It’s normal for a coffee shop hotspot, where convenience is the point, but it should never be a setting on a network you control.
What to do if yours is WEP, WPA or Open
Don’t panic, but fix it, because the repair is quick and free. Go back into the router settings following the steps above and change the security mode to WPA3 Personal. If any device then refuses to connect, usually an old printer, gaming console or smart plug, choose WPA2/WPA3 Transitional instead. If neither option exists, WPA2 Personal with AES is the fallback and you should choose AES if the router asks for a cipher.
While you’re there, update the router firmware if an update is available, since updates can sometimes add WPA3 support to hardware that didn’t ship it. Set a new long WiFi password, because changing the protocol is the perfect moment to remove the old one. Each device will need to reconnect once with the new password, and on phones, it’s useful to first tap Forget This Network, so no old settings are left behind.
If the router is so old that WPA2 with AES isn’t even available, the hardware itself is the problem, and replacing it is the real solution. Any router sold in the last few years supports WPA3, and your Internet provider can provide a current model free of charge if you ask.
Frequently Asked Questions
Does the security type affect my internet speed?
Only slightly. Older hardware running WEP or TKIP can be limited to slower WiFi speeds, but WPA2 and WPA3 run at full speed on any modern router. Security is not a reason to accept a slow network, and a slow network is not a sign of weak security.
Can I check the security type of a network I am not connected to?
Not reliably from a phone or computer. Devices usually reveal the security details of the connection they are currently using. The router admin page is the only place that lists the setting for a network whether or not you are joined to it at that time.
Is WPA2 still safe enough in 2026?
Yes, for use at home, as long as it is WPA2 Personal with AES and a strong password. WPA3 is the better setting where your devices support it, but WPA2 with AES is a world away from the truly risky choices, which are WEP, plain WPA, TKIP and open networks.
Why does my iPhone say Weak Security when my router says WPA2?
Your router is probably set to WPA2 with TKIP, or mixed WPA/WPA2 mode, both of which iOS considers weak. Change the router to WPA2 with AES only, or to WPA2/WPA3 Transitional, and after you forget and rejoin the network, the warning should disappear.

Leave a Reply